The SME-24 Nozzle Cleaning Machine adopts a multi-nozzle jet cleaning method to thoroughly remove solder paste from the nozzles.
The SME-24 is a fully automatic cleaning machine that can clean 24 nozzles at a time. Different types of nozzles are equipped with corresponding fixture trays, so all types of placement machine nozzles can be cleaned. After cleaning, the nozzles are automatically dried with compressed air.

1. Clean 24 nozzles at one time, with short cleaning time and high efficiency.
2. Replaces traditional manual cleaning, solves the problems of ultrasonic cleaning, and reduces the occurrence of material throwing during placement.
3. Uses supersonic atomized water jet cleaning to completely remove dirt and impurities that cannot be cleaned by ultrasonic methods.
4. Maintains excellent cleaning performance even for nozzles with increasingly smaller aperture sizes.
5. Provides more thorough cleaning, directly extending the service life of nozzles with a cleaning rate of over 99%.
6. Equipped with a special cover plate to protect the surface coating and reflector of the nozzles.
7. Uses pure water or deionized water for cleaning, no cleaning agent is required.
8. Simple and convenient to operate.
9. Suitable for various types of placement machine nozzles.

No.	Item	SME-24 Specification
1	Air Source	0.5~0.7Mpa
2	Power Supply	AC220V, 1A
3	Cleaning Fluid	Pure Water or DI Water
4	Cleaning Time	3~6min
5	Drying Time	2~3min
6	Jet Pressure	≤0.55Mpa
7	Cleaning Fluid Consumption	≤150cc/hour
8	Applicable Nozzle Range	Min. 01005 ~ Max. Inner Diameter ￠2.0mm
9	Fixture Specification	24 Holes for Small Nozzles / 12 Holes for Large Nozzles
10	Machine Dimension	L665*W555*H475(mm)
11	Machine Weight	30KG