SME-5600C is an energy-saving, environmental protective, integrated, high-end cleaning machine. It can automatically complete cleaning, rinsing, drying process in one chamber by just push the start key.
SME-5600C main application: Car electronics PCBA, Military PCBA, Aerospace PCBA, Telecom PCBA, Medical device PCBA, Digital meters PCBA.

1.For small amount, multi-spec PCBA wash.
2.Two layers of wash basket, each layers basket size:L610*W560*H100mm
3.Equip with front window and LED light,the whole process visible.
4. Automatic cleaning mode: clean, rinse, dry process can complete in one compact machine.
5. A comprehensive cleaning system for all kinds of SMT and THT PCBA residual rosin, water-soluble flux, no-clean flux / solder paste and other organic and inorganic pollutants for thorough and effective cleaning.
6. Lower operating costs: built-in filter makes the dilution repeated used. By using compressed air blow method at the end of cleaning process : blow the residual detergent off from pipeline and the pump , which effectively save 50% dilution.
7. DI water rinse time can be set to meet ion contamination requirements.
8. Total SUS304 stainless steel, 15 years lifespan.

S/N	Item	SME-5600 spec
1	Wash basket size	L610* W560* H100 (mm) x2 layers
2	Wash tank capacity	18L
3	Concentrate liquid tank capacity	30L
4	Diluent liquid tank capacity	60L
5	Wash time	5~20min
6	Rinse time	1~2min/次
7	Rinse times	1~99
8	Dry time	10~30min
9	Diluent liquid heat temperature	RT~99℃
10	PCB Dry temperature	RT~99℃
11	Resistivity	0~18MΩ
12	DI water supply	30~65L/Min，0.2~0.4kgf/cm2
13	Vent size	Φ76xH50(mm)
14	Power supply/Air supply	AC380V 3P,50/60HZ,30KW/0.5Mpa,200~400L/Min
15	Machine size	L1300*W1200*H1850(mm)
16	Machine weight	600KG