SME-6100 is an in line deflux cleaning machine. SME-6100 is used to clean water-based flux, solder balls and other contamination on PCBA.

1.PCBA in line clean system.
2.Spray clean to remove water based flux and other contamination.
3.DI water wash+ DI water rinse+ Hot air dry process.
4.Wash and rinse DI water add/discharge automatically.
5.Wash liquid spray pressure can adjust for different chips.
6.DI water resistivity monitoring system.
7.Air blow+ Hot air dry system.
8.PLC control system, English interface and friendly operation system.
9.304 stainless steel frame structure.
10.SMEMA lines to connect up and down stream equipment.
11.Wash liquid PH value monitoring function.

S/N	Item	SME-6100 SPEC
1	Net conveyor width	600mm
2	Net conveyor speed	100~150cm/min
3	Net conveyor height	900±50mm
4	Net conveyor direction	Left to Right
5	Product width size	600mm as max
6	Product height	100mm as max
7	Wash liquid tank capacity	120L
8	DI water capacity	40L
9	Filter precision	1um
10	DI water consumption	400~800L/H
11	Air vent amount	30m³/H
12	System control	PLC
13	Power/Air supply	380VAC,3P,50/60HZ,90KW/0.5Mpa，200L/Min
14	Resistivity range	0~18MΩ
15	Machine size	L4000*W1750*H1650mm
16	Machine weight	2000KG