By using latest special mechanism design, SME-30 use the hydrodynamic water fragmentation，producing very fine water mist，with the speed of sound (360m /s) to form a strong momentum jet to the nozzle and form a continuous energy field on the top of nozzle，crushing the dirt on the surface or internal of Nozzle，during the cleaning process the cleaning liquid ( DI water) can be achieved automatic direct emissions, not need cleaning solvent at all.
SME-30 can wash 30 nozzles at one time. It can clean all types of nozzles by using different nozzle trays. Compressed air blow to make nozzles dray.

1, a cleaning 24 suction nozzle, cleaning time is short, high efficiency.
2. Replacing traditional manual cleaning, solving the problem of ultrasonic cleaning and reducing the occurrence of chip throwing.
3. Atomized water flow supersonic jet cleaning thoroughly solves the dirt and impurities that cannot be cleaned by ultrasound.
4. It will not be difficult to clean due to the decreasing diameter of the suction nozzle.
5. Cleaning is more thorough, directly extending the lifespan of the suction nozzle, with a cleaning rate of over 99%.
6. Special cover plate to protect the surface coating and reflector of the suction nozzle.
7. Clean with purified or deionized water without using cleaning agents。
8. Simple and convenient operation.
9. Suitable for various SMT suction nozzles.

Serial number	project	SME-30 Specifications
1	Air source	0.5 ~ 0.7 Mpa
2	Power supply	AC220V,1A
3	Cleaning fluid	Purified water or DI water
4	Cleaning time	3~6min
5	Blow-drying time	2~3min
6	Injection pressure	≤0.55Mpa
7	Cleaning fluid consumption	≤150cc/hour
8	Clean nozzle range	minimum01005~Maximum inside diameter￠2.0mm
9	Fixture specification	Small suction nozzle 24 holes/large suction nozzle 12 holes
10	Machine size	L665*W555*H475(mm)
11	Machine weight	30KG